AER has reduced the frequencies for several types of Calibrations. Here is a link to a pdf “Calibration Frequency Cheat Sheet” Many found helpful.
Author Archives: jerry@measurementengineering.com
Portable Test seperator setup for oil well testing
We have setup one of our test separators to work well for cardium well testing. 1440PSI 20″x 8′ 3 phase but dressed 2 phase with Peterson Sampler on emulsion. Chart Recorder, 2″ Northstar Jr. OrificeChanger on 16′ Tandem Car Hauler Trailer.
Gas EFM Calibrations
When we do a EFM Calibration or verification, our trained staff follow all manufacturer’s recommended procedures. We the calibration and verification requirements in AER Directive 017 are followed. We also verify not only the EFM itself, but check the orifice run and inspect the orifice plate and changer if possible. We have found damaged orifice …
Training course- Measurement Problems Fixed
COVID-19 Protocol
At Measurement Inc. we encourage a safe and healthy work environment, and we are working diligently to ensure the good health of every employee and customer that is in need of our continued services. We continue to offer the Essential Services required to continue operations of oil gas facilities, in the areas of Instrumentation, Measurement …
We Add Value!
We provide value to our customers through a few different ways. All of our data is entered directly into a database, where it is searchable and easily stored as a pdf. Paper copies are printed off and left onsite. This database helps in scheduling and keeping track of past and upcoming calibrations. When a problem …
Questions and Info
Should you have any questions regarding any information please feel free to contact us using the following information below. Jerry Greiner(President) jerry@measurementengineering.com Telephone : (780) 514-5010 Fax : (Edmonton Direct) (780)665-6162 P.O. Box 7867 5428B Industrial Road. Drayton Valley, AB T7A 1S9 Thank-You …